This web page outlines the IoT device and sensor options for the eDigiT2Life project. *All guide prices are specific to the eDigiT2Life project and must not be shared commercially.
IoT Developer Base Kit
The IoT developer base kit is optimised for indoor and outdoor sensing.
All sensor options listed in the ‘available sensors‘ page require the IoT developer base kit.
Examples of sensing packages containing the IoT Developer Base Kit can be found on the ‘available sensors‘ web page.
Maximum sensor options per IoT developer base kit may vary. ScienceScope can advise upon request.
On board sensor options.
Compatible with the IoT@School data visualisation platform. Click here to view system specifications
The IoT Wearable enables the user to gather sensor data across multiple locations, whilst maintaining connection to the IoT@School system.
Uses an arm strap to hold the device to the body.
4 on board sensors. Sensor specifications are below.
Compatible with the IoT@School data visualisation platform. Click here to view system specifications.
LoRa / LoRaWAN base station required. See below.
IoT Wearable Specifications
Data sample rate: Minimum 3 seconds
Data Upload Rate: Typically 1 or 5 minutes.
Connection Type: LoRa / LoRaWAN
Power Requirements: 48hr battery life as standard. For higher capacity requirements please contact us.
* The IoT Wearable contains a selection of sensors compatible with lower power LoRa / LoRaWAN. Other sensing options can be considered for development upon request.