Micro:bit School Prototyping Kit

£49.95£59.95 excl VAT

The micro:bit school prototyping kit is everything you need to begin using the micro:bit in a practical and visual way. This comprehensive school prototyping kit has been designed for use with standard 4mm banana cables and crocodile clips to eliminate the need for soldering therefore making prototyping easier and safer for your students. The kit includes the new ScienceScope micro:bit breakout board, a range of micro:bit compatible products as well as a variety of components.

Breakout Board
If you want to get the most out of your new micro:bit then look no further than the micro:bit breakout board. It offers up to twelve input/output channels that all use standard 4mm  banana plug connections as well as four 3.3 Volt outputs and four GND channels. Both analogue and digital, inputs and outputs are available to give you complete control of your circuits and components.

Sound Cable
The micro:bit can be programmed using the ScienceScope sound cable to turn speakers on and off very fast at varied frequencies, which creates specific musical notes. The  sound cable enables you to connect the micro:bit to a set of headphones,  speakers or any other audio input and use it to play and compose music or investigate sound.

Joystick
The joystick board has been converted to allow 4mm banana plug connection to the micro:bit. It offers signal in both the x-axis and y-axis as well as a push button.

Components
Included in this school prototyping kit are a number of components that enhance the usability of the micro:bit and breakout board. All components included are compatible with the micro:bit 3.3V power limit so can be used with the standard micro:bit battery pack.

Purchasing Option
There is the option to purchase this starter kit with or without the micro:bit, battery pack, USB cable. Select the option below.

Clear
SKU: S8056 Categories: , ,

Description

Includeds8002-bbc-microbit-docking-station-600x600px-no-bbc-logo

  • 1 x Breakout Board
  • 1 x Sound Cable
  • 1 x Joystick
  • 3 x Red 4mm Banana Cable
  • 3 x Black 4mm Banana Cable
  • 10 x Crocodile Clips
  • 1 x Red LED
  • 1 x Yellow LED
  • 1 x Green LED
  • 1 x LDR
  • 1 x 10K Resistor
  • 1 x  147 ohm Resistor
  • 1 x 69.8 ohm Resistor
  • 1 x 40.2 ohm Resistor
  • 1 Temperature Sensor

Option to Include

  • 1 x Micro:bit
  • 1 x Battery Pack
  • 1 x USB Cable 1 Meter

Activities

Night Light
This activity will enable you to design, connect and code a light sensitive night light using the micro:bit LED matrix and various components. Click the links below to download the activity instructions and code. The activity download below is a zip folder contains the activity instructions PDF images of the code and the hex file code that can be opened in the micro:bit code editor at www.pxt.io
Activity Zip
Activity Instructions PDF

Safety advice for the micro:bit

Additional information

Select Option

BBC Micro:bit School Prototyping Kit, BBC Micro:bit School Prototyping Kit and BBC Micro:bit

Reviews

There are no reviews yet.

Be the first to review “Micro:bit School Prototyping Kit”

Your email address will not be published. Required fields are marked *

Recent Posts

Follow Us

Facebooktwitter